The outside cover is made with two different materials; the topside is a high-denier Polyester with a PVC laminate, while the bottom (Hull) is made with a PVC tarpaulin. "PVC tarpaulin" is made by combining two sheets of vinyl with a fabric mesh in the middle. The outer cover provides an additional layer of protection for the inner tube. This is very durable and resistant to stretching and tearing. The perimeter of the cover is electronically welded so that it is watertight. The inflatable tube is made of heavy-duty PVC. When the tube is inflated the outer cover takes form and the kayak becomes more rigid. The bow and stern have rigid forms built-in to the cover, which gives the kayak increased performance on the water. The seats are constructed using a very durable 420D Nylon Rip-stop fabric with a Polyurethane coating. This offers comfort and support. The seats will float should they happen to get outside of the kayak.
Your center of gravity is lower in our kayaks, which results in a nice feeling of stability when paddling. Instead you can focus on the nature surrounding you, or fishing, or even just soaking up the sun. The two-person DragonFly2 XC™ can also be paddled by one person sitting in the back seat. This allows more room for gear on an extended paddle trip. Each kayak has a tracking fin on the bottom as well as a skid plate for running ashore. The fin helps keep the kayak going straight and the skid plate provides additional durability when beaching the kayak. These boats are great for lakes, bays, marinas, mild rivers but always be familiar with your surroundings, and thoroughly read and understand all instructions and cautions.
The main chambers use the Advanced Elements Spring™ Valve. This valve has the function and durability of other military type valves and is compatible with most standard pumps. The Advanced Elements™ Spring Valve has a spring loaded plunger for easy inflation and deflation settings. The other chambers are the Twistlok™ valves.
Tracking is dependent on the length, weight and hull shape. The Lagoon™ is more maneuverable because of its length, however both kayaks have a tracking fin, and skid plate which improve tracking. The Lagoon2™ is longer and tracks very nicely with two people, or with one person and gear. The rigid bow and stern are formed to lift upward and allow the kayak to punch through waves with little resistance, instead of plowing through the water.
No these are dry boats. Self-bailing or self-draining boats are intended for whitewater use. The floor of a self-bailing kayak has holes that allow water to move in and out of the boat, and are always a wet ride. They are less stable because you must be seated above the water line for them to work properly. The Firefly™ and Lagoon™ kayaks are NOT Self-Bailing.
ALSO SEE UNIVERSAL FAQ'S LISTED ABOVE
On average it takes about 5 minutes when inflating with a foot pump. It will obviously take longer than that the first time you setup as you will want to get familiar with the components and assembly described in the owner's manual.
The unique bow and stern improve performance by doing the following. The bow is narrow and sharp as well as raised. This reduces the resistance through the water and keeps the waves from breaking on the deck. The Stern closes the water behind the boat to keep the kayak traveling straight.
On the Lagoon™ kayaks, yes, the coaming around the seating area can be used to attach a spray skirt(s). However it is not a rigid coaming, so it would not be sufficient for Eskimo rolls, but it will keep excess water out of the boat and keep the warmth in on winter day. Spray skirts are available through dealers and various online retailers.
The Firefly™ has 3 chambers; the Lagoon™ has 6 chambers, while the Lagoon2™ has 8 chambers.