ADVANCEDFRAME® CONVERTIBLE CONVERSION DECKS
Attach either optional Conversion Deck to make your AdvancedFrame® Convertible a closed deck solo or tandem kayak in a matter of seconds! The Single Deck sports a series of d-rings with bungee deck lacing, arched deck riser aluminum stays, and a rear cargo hatch while the Double Deck has d-rings and a mesh pocket for enhanced gear stowage.
LUMBAR SEAT AE2013
High support seat back, with stiffener support rods. Adjustable inflatable lumbar cushion for added support. Compatible with AdvancedFrame and StraitEdge models.
KAYAK SEAT LINK AE2502
These easy to use clip-in adaptors offer the ability to install an Advanced Elements kayak seat on just about any kayak. They also allow for the attachment of any aftermarket kayak seat to your Advanced Elements Kayak. Kit also works for adding an AE Seat to the Hula™11 SUP.
COILED SUP LEASH AE4004
Comfortable, durable, easy to use coiled SUP leash with storage bag. Leash not for surfing.
Length: 9’, Weight: 8.8 oz..
KAYAK CART AE3010
The Advanced Elements Kayak Cart is designed to assist in the cumbersome job of moving your kayak to the shoreline. With quick release adjustable straps and pneumatic all-terrain rubber wheels, just simply load up your kayak with gear, strap it to the cart, and head for the water. Once you reach the shoreline, simply fold the cart flat, remove the wheels, and it is ready to be stowed away above or below deck!
- Strong, light weight aluminum frame collapses flat for maximum portability.
- Durable removable pneumatic rubber wheels.
- Quick release adjustable tie-down straps.
- Flip-out kickstand.
- Durable rubberized kayak pads.
- Weight of 7 lbs.
- Load Capacity of 200 lbs.
ADJUSTABLE FOOT PEGS AE4003
Get more leverage, stability, and comfort while paddling. Simply attach the foot peg set, utilizing the adjustable webbing straps, and adjust your foot position as you go. Designed to fit the AdvancedFrame lineup as well as the Lagoon 2 and StraitEdge 2 models.
ADVANCEDTRAK™ KAYAK RUDDER KIT AE4005
Add turning and tracking performance with the AdvancedTrak™ Kayak Rudder Kit. Developed specifically for our AdvancedFrame® line of kayaks, this complete kit includes a set of our AE4003 Adjustable Foot Pegs with added rudder control pedals, a rudder that is quick to install and remove, our AdvancedTrak™ Rudder Mount, and a rudder rigging kit. Includes all hardware and instructions for a clean install to your kayak.
Learn how easy is it to install HERE!
CANOE AND KAYAK ANCHOR AE2017
The 3 lbs. Anchor System is a unique folding/locking 4-fluke design. It is great for use with kayaks and canoes and it holds well on most types of bottoms, from sand to rock. The galvanized anchor has a sliding collar which keeps the flukes drawn up tight against shank when stowed and then drops to lock the flukes open when deployed. It is easy to remove the anchor from the water: simply pull and stow!
The Anchor System includes a 3 lbs. collared galvanized grapple anchor, 60 ft of line, carabineer, line float, and a mesh travel bag for both the anchor and the line.
Add additional abrasion protection to your AdvancedFrame® inflatable floor with the new Dura-Floor! The Dura-Floor is a rugged foam floor designed with Secureloc™ “tabs” to lock the Dura-floor in place once its installed over your existing inflatable floor. Three sizes designed to fit the AdvancedFrame® line of kayaks.
• AE2043-AF1: Fits AdvanceFrame® & Sport Kayak
• AE2043-AFX: Fits AdvancedFrame® Expedition Kayak
• AE2043-AFC: Fits AdvancedFrame® Convertible Kayak
AE3041-R PACKLITE™ OUTER COVER ACCESSORY
The perfect accessory for the PackLite™ Kayak! Simply install the PackLite™ Kayak* inside of the AE3041 PackLite™ Outer Cover and you add a tracking fin, an extra layer of durability, and the ability to attach a spray skirt for protection in adverse conditions. Made of light-weight ultra-packable and durable rip-stop material, this outer cover provides a series of forward d-rings for attaching the PackLite’s carry bag for easy access small gear stowage as well as rear d-rings for additional gear lashing.
Weight: 4 Lbs (1.8kg).
*AE3021 PackLite™ Kayak not included.
KAYAK COVERS AE2046/AE2047
Give your kayak long-term protection from the elements. Easy to use roll-and-clip closure allows adjustment for multiple kayak lengths.
Two Sizes for multiple lengths:
• AE2046: Medium Cover fits kayaks up to 11’ in length
• AE2047: Large Cover fits kayaks up to 15’ in length.
Both covers fit boats up to 73″ in circumference at their widest point.
AIRFUSION SKEG AE4002
Easy to use stationary skeg for the AirFusion Kayak. Simply install on the kayaks rear end cap, run the pull line and you are ready to go. Enhances tracking and designed to pivot upward with integrated pull line.
ACCESSORY FRAME SYSTEM AE2042
The Accessory Frame System offers a variety of easy access options for Advanced Elements kayaks, as well as many other inflatables and hard-shells. Once installed, add any aftermarket 1” rail-mounts, and customize any kayak with rod holders, a fish finder, or other equipment. Kit includes the Accessory Frame, 8 mounting grommets for multiple applications, application glue, and instructions. Installation surface on kayak deck must be at least 23” wide.
GLUE ON D-RINGS AE2501
Add more attachment points to your inflatable kayak! Pack of four d-rings that can be glued anywhere on your kayak. Use any PVC based glue, or Aquaseal®, or the glue from your repair kit. Installs cleanly on any AE Kayak. *Glue Not Included in Kit.
INFLATABLE FOOT BRACE AE2012
A compact friction fit foot brace designed to provide additional foot brace support.
Can be used with the AdvancedFrame, AdvancedFrame Sport, AdvancedFrame Convertible (front seat only), Lagoon2 (front seat only), and children can use it with the Lagoon1 and FireFly.