Seem leak From valve Stem skirt to bladder

Questions, suggestions, answers, products etc. about repairing, cleaning and maintaining your kayak.

Moderators: JCOOLEY, rsimpson

Post Reply
zulummar
Posts: 1
Joined: Sat Jul 31, 2010 6:07 pm

Seem leak From valve Stem skirt to bladder

Post by zulummar » Sat Jul 31, 2010 6:17 pm

I have a Straight edge canoe. On one of the wall bladders there is a leak from the fabric "skirt" below the air valve. It right on the weld that attaches it to the bladder.

How should I go about repairing this? I have the Glue that came with it and even some fish tank silicon.

Any help would be appreciated!!

micahgee
Posts: 66
Joined: Wed Apr 28, 2010 11:49 pm
Location: Puget Sound

Post by micahgee » Sun Aug 01, 2010 10:11 am

First off, I suggest e-mailing Advanced Elements. They will likely be willing to send you a new bladder if needed.

Second, a complete dis-assembly is needed to find the leak. If the leak is a teeny "pinhole" it will be easy to repair with the glue found in the AE repair kit. Holes bigger than a few millimeters will be more difficult to fix.

I suggest using 2 layers of glue, one layer while deflated and one layer while partially inflated to make sure the fix takes the proper shape and hopefully make the fix permanent.

JCOOLEY
Site Admin
Posts: 983
Joined: Tue Feb 20, 2007 2:46 pm
Location: Benicia, CA

Post by JCOOLEY » Sat Aug 07, 2010 7:58 am

First remove the tube from the outer shell. Locate the leak and see if it can be repaired. Notg sure when you purchased it and from who but that information is helpful along with HUll ID. Email this to info@advancedelements.com along with a couple of pics of the trouble area and we can best assist you.

Jeremy

Post Reply