PSI, Proper Technique, Valves etc.
- Posts: 1
- Joined: Mon Sep 01, 2008 6:23 am
I have the double action pump and am using it for the first time to inflate a 2002 inflatable kayak. None of the adaptors seems to fit tight over the spring valve to inflate. What am I doing wrong?
- Posts: 2
- Joined: Mon Sep 01, 2008 6:24 pm
Try a bit of masking tape around the outside of the adapter. It gave me just the right degree of traction to hold the hose in place so that I could pump with both arms.
- Site Admin
- Posts: 983
- Joined: Tue Feb 20, 2007 2:46 pm
- Location: Benicia, CA
The older valves from 2002 to 2005 require a valve adaptor that came with the kayak. It screws into the valve and has a rubber hose the the pump attachment attaches to. If you do not have this adaptor, then you can purchase it from our replacement parts section on the website www.advancedelements.com
. This section is located under products.