Installing Backbone in DF2 XC

AE2023-AF1, AE2023-AFX, AE2023-AFC, AE2023-DF2.

Moderator: JCOOLEY

Post Reply
padavius
Posts: 6
Joined: Wed Mar 19, 2008 7:05 am

Installing Backbone in DF2 XC

Post by padavius » Thu Apr 10, 2008 7:45 pm

Hi All,

I've got another newbie question about the new backbone for the DF2 XC. The instructions say to put the backbone under the inflatable floor, but I'm suspecting that these generic instructions do not apply to the DF2 XC, which has a 1/2 inch foam floor that is not inflatable. So, do I install the backbone above the floor, and would it still be effective in that position?

(I could ring up customer service and ask them about this, but I figured having my question answered here would be helpful to other people, especially with Jeremy being so helpful and fast in answering everybody's queries.)

Thanks much.

paddy

padavius
Posts: 6
Joined: Wed Mar 19, 2008 7:05 am

Post by padavius » Fri Apr 11, 2008 8:43 am

Hi Jeremy,

Does installing it above the floor adversely affect its function? I find installing above the floor to be far FAR easier than under the floor...

Thanks again.

paddy

JCOOLEY
Site Admin
Posts: 978
Joined: Tue Feb 20, 2007 2:46 pm
Location: Benicia, CA

Post by JCOOLEY » Fri Apr 11, 2008 9:26 am

Paddy,

Sorry, I relayed the wrong info before. The Backbone actually works better being placed on top of the foam floor. In the instructions, under Step 4, it says in the second sentence, "install foam floor then proceed to Step 5".

Jeremy
8)

Post Reply