What type of white water have you used the backbone in?

AE2023-AF1, AE2023-AFX, AE2023-AFC, AE2023-DF2.

Moderator: JCOOLEY

Post Reply
Posts: 1
Joined: Mon Jun 06, 2011 7:51 pm
Location: NY

What type of white water have you used the backbone in?

Post by jchurch » Wed Jun 08, 2011 7:53 am

Has anybody had the backbone in class II or III's? Those are my favorite to use my AF1 in, but I'm afraid they could cause damage to the backbone, or perhaps does the backbone cause excessive wear and tear on the floor when moving over rocks in shallow rivers?

What kind of water have you used it in?

Posts: 3
Joined: Tue Jun 07, 2011 11:10 am

Post by pdenker » Wed Jun 08, 2011 4:51 pm

I'd be curious to know this as well. It's low-water season in Georgia; bottoming out and scraping over rocks and sand is a common occurrence on most of our rivers. Just got my BB -- wondering if it'll make bottoming out more damaging to the hull.

Also curious if the BB makes turning/maneuvering more difficult. Have to do a lot of weaving about, in our low-water rivers, to avoid those aforementioned shallow spots. ;)

Site Admin
Posts: 992
Joined: Tue Feb 20, 2007 2:46 pm
Location: Benicia, CA

Post by JCOOLEY » Fri Jun 10, 2011 11:02 am

If paddling in shallow waters, you probably do not want to use the backbone. It will push that area of the kayak lower and you risk scraping that area more than without it. Also, because it enhances the tracking of the kayak, you will not be able to maneuver as quickly as without it.

Post Reply