Welding floor chamber back together

AE1006-G(2004-2006), AE1006-Y(2007-Present), AE1014-Y(2007-Present), AE1008-GRN(2005-2007), AE1008-R(2008-Present)

Moderator: JCOOLEY

Post Reply
Feretdog
Posts: 1
Joined: Wed Jul 25, 2012 9:34 am

Welding floor chamber back together

Post by Feretdog » Wed Jul 25, 2012 3:07 pm

Welding floor chamber back together

My tandem Straight edge2 tandem IK weld of the keel has broken. I had left the zipper to the floor chamber partially open during inflation and the weld came apart over 10 inches. As a result there is also a small 2 inch tear. How can I weld the plastic back together? Can I do it myself or do I need to send it in?

rsimpson
Site Admin
Posts: 203
Joined: Tue May 20, 2008 10:15 am
Location: Bay Area

Post by rsimpson » Wed Jul 25, 2012 3:52 pm

You can do it yourself. Please send pictures to our customer service dept. and we can send out the material and advise on the best way to repair it. Thank you.

info@advancedelements.com

Post Reply