12V Pump with Screw Type Valves

AE5001 PAcklite Pump, AE2001 Foot Pump, AE2003 12-V Electric Pump, AE2009 Hand Pump, AE2011 Hand Pumps w/Gauge, AE5006 Xcelerator Pump

Moderator: JCOOLEY

Post Reply
dspid2404
Posts: 293
Joined: Mon Jun 01, 2009 4:48 pm
Location: Virginia, U.S.A.

12V Pump with Screw Type Valves

Post by dspid2404 » Sat Jun 20, 2009 3:53 pm

Does the 12V pump that Advanced Elements sells have the screw on adapter needed for inflating the two main chambers in the current AE1009 Expedition? Looking at the picture of the pump I can't see how it would work. Can I use the hoses from the double action pump?

Also, how long is the power cord that plugs into the power socket?

JCOOLEY
Site Admin
Posts: 983
Joined: Tue Feb 20, 2007 2:46 pm
Location: Benicia, CA

Post by JCOOLEY » Tue Jun 23, 2009 8:38 am

The 12-V does not have the screw on adaptor. The attachments are different than the other pumps and we couldn't attach the screw on adaptor to the other and have it work with the pump. It would require a completely different type of screw on adaptor. The 12-V can only be used to partially inflate the kayak anyway, so you can pretty much sit there holding in place for a couple of minutes. The cord is about 8 ft. long.

Jeremy
8)

Post Reply